Why All Hydroponics Growers Should Use Reverse Osmosis Systems

Do you know some of the best RO hydroponic systems? To begin with, it is only natural to want all the best for any plants that you have nurtured with practically all the care in the world. Venturing into hydroponics and looking at the best systems for reverse osmosis is one of the best ways to show your plants how much you love them. Looking at reverse osmosis, it handles hard water and tries to do away with the bad particles. Not only does it eliminate these `bad particles`, but it also tops up minerals for better development of the flora. Let us now look at some of the highly regarded reverse osmosis systems that you could turn to when in need of good hydroponics.

The Best Reverse Osmosis Systems to Use In Hydroponics

• The Stealth-RO100 Hydro-Logic 31035 100-GPD   Reverse Osmosis Filter
• The Evolution RO1000 Hydro-Logic 31023 1000-GPD High Flow Reverse Osmosis System
• The Junior Aquatic Life 3-stage 100 GPD Reverse Osmosis Filter System

1. The Stealth-RO100 Hydro-Logic 31035 100-GPD Reverse Osmosis Filter

• Specifications of the System

This system consists of a three staged process of filtration. There is no battery required for its functions and can produce up to a hundred gallons every day with a ppm of 550.The conditions required for the production of such vast amounts of water include 77 degrees Fahrenheit and a minimum of 40 psi.

• The Filtration Process

It has a superb filtration system that entails the use of pleated sediment filters that allows for cleaning at any given time. The function of this part is to do away with dirt, silt, and sediment. The second phase in its purification system consists of a pre-filter that cuts down on toxins such as chlorine. The description of this pre-filtration system is popularly described as a carbon block that looks like a green coconut. Finally, the last stage in the filtration process is comprised of 100 GPD Reverse Osmosis membranes that take care of the solids that have already dissolved.

• Replacement of the parts

The best point at which to change the membrane is within a six-month time frame. The carbon filter works at optimum levels before producing around 1250 gallons. After this, I would recommend that you change it for better performance of the whole system. The sediment filter that is pleated must have regular cleaning and you could do yourself no harm by changing it every half year. If at all you have been using a catalytic filter, you must take it from me, the 2000-gallon mark is your cue to change it.

2. The Evolution RO1000 Hydro-Logic 31023 1000-GPD High Flow Reverse Osmosis System

• Specifications of The system

The system has a weight of approximately eight pounds and like the previous system we have looked at, it doesn`t use a battery. Its main strengths lie in its ability to reduce the water wasted in each gallon of already used water. The product can easily fit in a place beneath the sink and has the potency of doing away with up to 95% of the germs found inside the water. In my opinion, this is a vital aspect that should never be overlooked because it cultivates one of the best environments for your flora to flourish.

• Included Parts of the system

The system is also has a Reverse Osmosis unit that is high-flow in nature. The membrane used for filtration that it packs consists of a double Reverse Osmosis membrane. It also comes with a catalytic pre-filter that is carbon in nature and on top of it, a hose connector. There is a pressure gauge for pressure regulation purposes and a series of lines that have different colors for identification. The white colored line is an inlet line, the blue colored one is the water line and finally, the black in color line is the drainage line. In addition to that, the drain line comes with its own valve for shutting off.

• How the System works

This system has a production of around 1000 gallons every day. It boasts of a 2:1 ratio for waste and water that is purified. Having used other systems before, I would comfortably assure you that such a figure is a force to reckon with in the reverse osmosis system world. To break it down into simpler terms, it means that for every 1000 gallons of pure and clean water, it puts to waste about 2000 gallons. This is plainly better than other systems in the market. On top of all this, it also has a faucet which is used to assist one in the kitchen work you could have.

3. The Junior Aquatic Life 3-stage 100 GPD Reverse Osmosis Filter System

• Specifications of The System

This system consists of a water filter which does its work in three stages and comes with an automatic shut-off innovation. The system weighs about ten pounds and has relatively manageable dimensions to enable it to fit inside your kitchen because of the little space it occupies.

• The Filtration Process

In the three staged process of filtration, it contains a cartridge that is a solid block made of carbon. It also has a pre-filtration cartridge and a catalytic cartridge. During the first part of the process of filtration, it tends to do away with hard things such as sand. During the second bit of filtration, it discards materials like fluoride and arsenic among others. The third bit of this process involves removal of any other unwanted chemicals, of which at this point, aren’t many.

• Additional Information About The system

I also tend to think that the designers of this system were very smart in their handiwork because of adding one more feature. This is a manual valve that protects the membrane and increases its life, but only if put into proper use. This is something that many other Reverse Osmosis systems lack and hence you find that the frequency of replacing the membranes is high as compared to this system’s. This system also has a valve for shutting off and has some automatic features in it. The valve shuts itself off automatically whenever the outlet has not been opened.

Conclusion

With any of these reverse osmosis systems, your hydroponics are likely to grow for many years to come with hardly any complications. By reading this article, you will then be able to pick out the technology that works best for your hydroponics. I hope it has been of great assistance!

For those already using either of these systems, has the performance been satisfactory or is there a need for improvement?