Many people, as a way of eliminating contaminants in water, they have used the process of reverse osmosis. The process itself is something that you can do at home if you have all the right equipment with you. The process of reverse osmosis works by using the pressure in the system to force the water molecules to get past the semipermeable membrane. Just like that, you get to the filter and clean your water with ease. The result is that you always end up with delicious water for drinking. With the capability to remove up to 99 percent of the contaminants, it is more reason to see why many people often love it.
By now, you are probably wondering how to make ro water easily at home. We get to discuss all that below. At the end of this guide, you should be able to have clean water always.
- 1 What you will need
- 2 Procedure
- 3 Conclusion
What you will need
- Reverse osmosis unit
- Storage tank
- Installation kit and faucets
- Drill bits
Choosing the installation location
The location of where you would be installing the system matters a lot. You are required to choose a location that will give you enough space to install all the parts so that you can end up filtering easily. If it is in the kitchen, you can find a cabinet that will have enough space for the proper installation of the kit. Some of the key things to consider would be the sink drain pipe and other valves.
Shut off the mains supply
It is crucial that you shut off the cold water supply valve so that you do not end up with water leaks all over when you start to connect the reverse osmosis system unit. If you find that the valve is not working, then the best thing to do would be shutting off the water supply to the whole section until you finish the installation. With your wrench, you can now open the cold-water faucet.
Connecting the reverse osmosis unit
Connecting the unit to the cold water supply can be done using various methods. The most common one would be using a saddle valve. Start by assembling the saddle valve on the water line, preparing it for connection to the reverse osmosis unit. Make sure to tighten the bolt on the saddle valve before completing other connecting. You are still advised not to over-tighten the bolts.
A quick tip would be using a Teflon tape to help with the prevention of leaks.
Drain the line connection
You will have to drain the pipe before you can proceed with the connection. In cases where the drain line pipe is corroded, then you will have to replace it. There is no point of having a highly corroded drain pipe in the first case.
With your drill bit, proceed to make a hole that will be used for attaching the drain clamp. You need to make sure that the hole in the clamp is easily aligned with the hole made in the pipe. Once the holes are aligned, you can now tighten the clamp. Still, you are not supposed to over-tighten the clamp.
Drilling holes for installing the faucets
Whenever you have to install the faucets to the reverse osmosis unit, you have to keep in mind things such as function, aesthetics and the convenience too. For your faucet base, the best thing to do would be opting for a flat area. Depending on the location, sometimes you do not necessarily have to drill the holes in your sink.
Here is a video with some quick tips for installing a faucet:
Proceed to remove the chrome plate cover to mount the faucet now. Sometimes you might not have enough space to get the different hoses to the sink, so might have to drill a hole on the edge of your sink. With the hole drilled, it should be easy to pass the hose before you can mount the faucets now.
You have to be careful depending on the surface you have to drill. In cases where you have a ceramic top, it can be complicated. Sometimes people end up making cracks into the counter top. When you have to drill, make sure you can follow the necessary precautions.
Installing the faucets
With the holes now in place, you can easily now insert the faucet stem into the hole. Depending on the faucet, sometimes there might be a few instructions to follow. Make sure that the installation is done based on the manufacturer’s instructions. Once you have installed the faucet, proceed to attach the tubing at the bottom that will now go to the reverse osmosis unit.
Mounting the unit
Some units might need that you have them hanging on the wall, so make sure that you have enough space to mount it. The same thing goes for those that would simply be placed under the sink. There has to be enough space to house the whole unit.
Proceed to connect the lines to the inlet valve of cold water and the outlet water to the faucet tubing. If there are any additional connections that have to be made, the manufacturer of the reverse osmosis unit will always tell you how to make these connections.
Once everything is now connected, you can slowly turn on the cold water line to let in the water for the process to start. Before you can be satisfied with the connections you have done, make sure to check for any leaks first. Make sure to seal all the water leaks at this point.
Just like that, you would now be able to make your reverse osmosis water. As you can see, the process of how to make ro water is not hard at all. With the right tools and correct procedure, it can all be done in an hour or less. Always make sure to check for leaks so that you do not end up flooding the house with water.
I hope you have enjoyed checking out this guide. If you have any questions about how to do anything, always post it in the comment section, and we will get to answer it in no time.