Are you looking for a guide on how to install a reverse osmosis system? Perhaps you have got an idea. That idea can be so effective if only you can master the art of how this system works and how to install it by yourself. The best reverse osmosis system performs exclusive and invaluable function in the removal of all the impurities from water. After successful installation, you can sit back to enjoy safe drinking water in your house.
Installation Requirements
Some of the materials and tools that are required for the installation of this system include the following:
- The electric drill
- The drill bits for metal cutting
- The concrete drill bits
- Screw driver
- The adjustable wrench
- The plastic tubing cutter & the Teflon tape
- Center punch and Hammer
Installation Steps

-
Step 1: Installation location
Before anything else is done, it is wise to look for the best location where the system can be installed. Finding the best location will ensure that the system fits well and that there is a lot of space and security from the external damage.
-
Step 2: Cold water valve
The second step of this process involves making sure that the cold water valve is closed. In this case, the cold water taps in the place where the system will be installed is shut down and this will allow for the next procedure to continue.
-
Step 3: Connecting to the cold water line
Connecting the line involves a number of steps and there are so many ways of doing so which include assembling the saddle valve clamp onto the cold water line. This is done until everything is tight and in the right position. Also, you can use the Ez adapter but this is optional and the Teflon tape is used here to prevent the system from leaking.
-
Step 4: Drain line connection
This involves the use of a driller and mounting the drain pipe onto the clamp and ensuring that the pipes are tightly fixed. It is also important to ensure that the clamp is well tightened at this stage.
-
Step 5: Faucet Installation
This is the main stage of the installation process. In this step, a hole is drilled inside the sink; faucet stem is then fitted in the same hole. It is so important to also ensure that the installed parts which include the base, the body and the rubber base washer of the faucet are above the sink.
-
Step 7: Unit location
This step involves setting things in their rightful place or position. Here, the system and the storage tank are placed in such a way that, they are under the sink and are always convenient.
-
Step 8: System hook up
You are almost done. Here, you have to remove the caps that are there at the end of the tubing since the tubing might be containing some water that were initially used for the testing process. Therefore, after removing the same caps, you should wipe out all the water at the tubing using a towel.
-
Step 9: Starting up
Everything is now set and the system can now be started. It is now ready for use.
In conclusion, once you have installed the reverse osmosis water system in your house, you are now on the safer side since you can use it to treat every other water before drinking. It is the only means that has been proven to be so effective in the removal of water impurities and thus is the best system for everyone.
The other articles may you concern, as this is by:
- Reverse Osmosis Water System Reviews
- Best Home Master Reverse Osmosis System
- Best 6 Stage Reverse Osmosis System
- What Does Reverse Osmosis System Remove?
Great Post!! I really loved reading your post.Thank you so much.