Best Reverse Osmosis System For Hydroponics Basic Knowledge

Contents

1 Explaining 3 Best RO System for Hydroponics
2 Benefits of best RO system for hydroponics

Introduction

You will always want everything best for the beautiful plants you have been nurturing with so much affection and this is the reason why you might get worried about the best reverse osmosis system for hydroponics.

The water plays the most important role in hydroponics as there is no soil to provide the plants with all the nutrients it requires for growth. The high quality solution works best when the water is pure. Reverse osmosis deals with the hard water, eliminates all the unwanted particles and adds minerals for the betterment of the plants. Here is a rough over-view of some best reverse osmosis system you can switch to for a flourishing hydroponics.

Explaining 3 Best RO System for Hydroponics

Hydro-logic RO For Hydroponics 31035

Hydro-Logic 31035 100-GPD Stealth-RO100 Reverse Osmosis Filter

This is one the most appropriate hydroponic RO system available in the market. An overall knowledge of the product will be helpful for the customers.

Product specification

This is a 3 stage filtration process which weighs around 10.4 pounds (the packaging although weighs around 10.8 pounds) and the dimension is about 6*16.5*19 inches. The system requires no battery. At 77^o F, 60 psi it produce around 100 gallons per day of around 550 ppm but min 40 psi is enough to initiate the process.

Filtration process

At the first stage it uses a pleated sediment pre-filter which can be cleaned anytime and it eliminates dirt, sediments, rust, silts etc. at the second stage we can see “green coconut carbon block” pre-filter which reduces toxins like chlorine. At the final stage there is 100 GPD RO membrane which works on the dissolved solids.

Replacement information of parts

The membrane is to be change within 6 months but depending on the sage it can be extended up to 2years. The green coconut carbon filter should be replaced after producing 1250 gallons where pleated sediment filter should be cleaned regularly and changed once in a 6-12 months. If you use catalytic filter then try to replace after producing 2000 gallons.

Hydro-logic RO For Hydroponics 31023

Hydro-Logic 31023 1000-GPD Evolution RO1000 High Flow RO system

This shows its excellence in reducing the amount of water wastage per gallon used water.

Product specification

The system weighs around 8.2 pounds so don’t get worried by the shipping weight which is almost 23 pounds. As usual we need no battery here and it can be attached under the sink easily being 21*11*11 inches in dimension. It tend to eliminate 95% of germs present in the water securing better environment for the floras.

Included parts

The system comes with a high-flow Ro unit. The filtration membrane present there are two RO membranes. There are catalytic carbon pre-filter and hose connector. They provide you with pressure gauge, inlet line (white), water line (blue) and drain line (black) along with shut-off valve.

Additional information

It produces around 1000 gallon per day. The waste and purified water ratio is 2:1 that is per 1000 gallons pure water it wastes 2000 gallon which is apparently efficient regarding other RO systems. it comes with a faucet that helps you in kitchen work as well.

Aquatic life 3-stage RO For Hydroponics

Aquatic Life 3-Stage 100 GPD Junior Reverse Osmosis Filter System

This is another efficient reverse osmosis system for hydroponics.

Product details

This is a 3-stage 100 GPD water filter that comes with auto shut-off technology. The product weighs around 10.7 pounds and the dimension is about 15.8 x 5 x 16.8 inches which is more likely to take less place in your kitchen. The optimal situation is around 77^o F and 100 psi.

Filtration process

The 3 stage filtration process includes one pre-filter cartridge, catalytic GAC cartridge and solid carbon block cartridge. The pre-filter cartridge is 1 micron in thickness. In the first stage it remove hard materials like sand, the second stage eliminates fluoride, arsenic etc. and the third stage is for removing other chemicals.

Other information

There is a manual valve that if you properly use can increase the membrane life. There is a shut-off valve that automatically turns off when the out let is not open. Colorful (blue, yellow, red) polyethylene tubing makes the plumbing easier.

Benefits of best RO system for hydroponics

Not only in drinking water purpose, the RO filtration process helps greatly in hydroponics as well. The hard water be it with contaminant or not, seems harmful for gardening and other purposes. The pure water will ensure the better growth of the plants. The basic benefits are,

Avoid blockage and other hazards

The hard water often causes clogging up of mineral salts in drippers, irrigation pipes or sprinklers due the alkalinity present in it. The pure water supply prevents this problem along with any blockages and the cleaning process takes less efforts.

For additives and nutrients

The RO water helps in using organic additives and organic nutrients and gives a better result in comparison with hard water.

Conclusion

Thus, we can see that for better growth pure water is irreplaceable and reverse osmosis gives water in possible purest form. Hence it is very important to install the best reverse osmosis system for hydroponics. It also helps the organic bacteria grow which is very helpful in the development process. So it’s time to choose wisely and let the plants flourish.

The other types of RO system may you concern: